How to access the Pontiac Fiero ECM

This guide is excerpted from the Throttle Cable Replacement Guide

Process:

1. Remove Shifter Center Console

• Remove Shift Knob/Handle: Standard simply unscrews, Automatic has a pin that must be pulled in the front.

• Remove the ashtrays and remove the 4 7mm screws

• Remove the 3 7mm filler plate screws and the 2 7mm armrest screws. If you have power windows/mirrors carefully disconnect the switches after pulling up the plate.

2. Remove Armrest/Glovebox

• Remove 2 Torx screws holding down the Lighter/Communications cover

• Remove 2 Phillips screws holding the cigarette lighter

• Remove 2 7mm screws holding the communications port

• Remove 2 7mm screws behind the glovebox Note for reinstall: These two screws will be longer than the rest

3. Remove ECM

• Loosen, do not remove the 4 10mmNuts holding down the ECU.

Only registered users can write comments.
Please login or register.

Powered by AkoComment 2.0!