|
How To - Install a 84 Fiero Throttle Cable |
|
|
|
|
Page 1 of 6 Installing a Pontiac Fiero Throttle Cable Please note: While I removed the center skeleton during this guide, it is not necessary to do so, you can work the cable out with it still in place. I removed it only to make the installation easier.
This guide is written with the intent to allow anyone, regardless of experience perform this job. As a result i will be describing each step in detail with pics to make the job as easy as possible.
Recommended Tools:
- Phillips Head Screwdriver
- Wide Blade Flathead
- 7mm driver
- 10mm driver
- Torx Driver
- Pair of light-duty pliers
Required Parts:
- Fiero Store Throttle Cable:
http://tinyurl.com/lsczx
Indications Cable Requires Replacement:
Heavy resistance on pedal, even though throttle moves freely by hand
Jerky changes in speed
Engine does not immediately idle down on pedal release
I began by removing all interior components that would be in the way, namely the entire center console and support skeleton.
|
